BBRST - THERMOFIT S1010 ADHESIVE 3004A, PART A
- MSDS: BBRST
- Manufacturer: RAYCHEM CORP
- Product Name: THERMOFIT S1010 ADHESIVE 3004A, PART A
- National Stock Number: 8040-00F005101
Product Identification
Product ID:THERMOFIT S1010 ADHESIVE 3004A, PART A
MSDS Date:01/01/1987
FSC:8040
NIIN:00F005101
MSDS Number: BBRST
Responsible Party
Emergency Phone: (415) 361-5524
Cage: FO008
Contractor
Telephone: 650-361-4907
Cage: FO008
Ingredients
METHYL ETHYL KETONE (2-BUTANONE) (MEK) (SARA III)
CAS: 78-93-3
RTECS: EL6475000
OSHA PEL 200 PPM/300 STEL
ACGIH TLV: 200 PPM/300STEL 9192
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
Hazards
Effects of Overexposure:IRRITATION SKIN & EYES/MUCOUS MEMBRANES/RESP
TRACT/NAUSEA/DIZZINESS/HEADACHE/A NARCOTIC EFFECT.
First Aid
First Aid:EYES: FLUSH WITH WATER FOR 15 MINUTES. SEK MED ATT. SKIN:
WASH WITH SOAP & WATER. REMOVE CONTAMINATED CLOTHING. SEEK MED ATT
FOR IRRITATION, IF PRESENT. INHALATION: REMOVE TO FRESH AIR.
RESTORE BREATH ING IF NECESSARY. SEEK MEDICAL ATTENTION.
Fire Fighting
Flash Point:24F (TOC)
Lower Limits:1.7%
Upper Limits:11.4
Extinguishing Media:CO2, FOAM AND DRY CHEMICAL
Fire Fighting Procedures:WERA SELF-CONTAINED BREATHING APPARATUS IN
ENCLOSED AREAS.
Unusual Fire/Explosion Hazard:CAUTION!! FLAMMABLE LIQUID. TOXIC FUMES
MAY BE EVOLVED IN A FIRE.
Accidental Release
Spill Release Procedures:FOR SMALL SPILLS - ABSORB ON PAPER TOWELS AND
EVAPORATE IN VENTILATED HOOD. FOR LARG SPILLS - ELIMINATE ALL
SOURCES OF IGNITION, USE INERT ABSORBENT AND DISSE.
Handling
Handling and Storage Precautions:FLAMMABLE LIQUID! USE A
WELL-VENTILATED AREA, AWAY FROM SPARKS OR OTHER IGNITION SOURCES.
DO N SMOKE, DRINK OR EAT IN THE AREA OF USAGE.
Other Precautions:KEEP CONTAINER CLOSED WHEN NOT IN USE.
Exposure Controls
Respiratory Protection:IF TLV EXCEED, NIOSH/MSHA APPROVED RESP
PROTECTION SHOULD BE WORN.
Ventilation:PROVIDE LOCAL EXHAUST VENTILATION TO KEEP BELOW TLV.
Protective Gloves:BUTYL
Eye Protection:GOGGLES
Other Protective Equipment:PREVENT EYE AND SKIN CONTACT.
Supplemental Safety and Health
MSDS DATE: JUL 86.
Chemical Properties
Vapor Pres:70
Spec Gravity:0.97
Solubility in Water:20%
Appearance and Odor:BLACK LIQUID; SWEET ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
Stability Condition to Avoid:SPARKS/FLAMES/HEAT/OXIDIZERS/STRONG
REDUCING AGENTS/BASES.
Hazardous Decomposition Products:TEMPS >500 MAY GENERATE FLUORINE
CPDS/HYDROGEN FLUORINE.
Disposal
Waste Disposal Methods:NORMAL METHODS BASED ON FEDERAL, STATE AND LOCAL
REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.